Hallo,
ich will für meine Cutti eine neue Motorhaube kaufen, hab eine auf http://www.vfnfiberglass.com/site.htm gefunden
nur weiß ich nicht was die Beschreibung meint mit air pin bolt stock flat......................??
'76-77 442 Ram Air Pin On Hood
'76-77 442 Ram Air Bolt On Hood W/ Airbox
'76-77 Cutlass Stock Flat Pin On Hood
'76-77 Cutlass Stock Flat Bolt On Hood
hoffe einer von Euch kann mir bei dem Rätsel helfen
danke
Simon
Pin On Hood??Bolt On Hood??.......Hä?
Moderator: superbee
- simon74
- V8 Cruiser
- Beiträge: 95
- Registriert: Sonntag 27. Januar 2013, 13:01
- Barvermögen: Gesperrt
- Wohnort: Radenthein/Kärnten
- Kontaktdaten:
- Kapitänkurtl
- Pro Stock
- Beiträge: 1825
- Registriert: Donnerstag 5. Februar 2009, 16:18
- Barvermögen: Gesperrt
- Wohnort: Nähe Wien
- Kontaktdaten:
- simon74
- V8 Cruiser
- Beiträge: 95
- Registriert: Sonntag 27. Januar 2013, 13:01
- Barvermögen: Gesperrt
- Wohnort: Radenthein/Kärnten
- Kontaktdaten:
- tobi
- Admin
- Beiträge: 3778
- Registriert: Samstag 10. Juni 2006, 22:46
- Barvermögen: Gesperrt
- Bank: Gesperrt
- Wohnort: Allerheiligen
- Kontaktdaten:
- simon74
- V8 Cruiser
- Beiträge: 95
- Registriert: Sonntag 27. Januar 2013, 13:01
- Barvermögen: Gesperrt
- Wohnort: Radenthein/Kärnten
- Kontaktdaten:
ok,
sodala jetzt bin ich wieder schlauer geworden
das ist die Antwort von denen Kapitänkurtl hatte recht
Morning Simon.
Thanks much for your purchase!
We can ship overseas, but it is a very expensive option with the carriers we have access to.
Most times, it is best if our customers make arrangements with a forwarding company here in the states that we can ship to, and they will handle the remainder of the journey from there.
Our pin on hoods are strictly for racing application.
There are no provisions for the rear hinges...
We recommend the use of dzus fasteners - small screw type pins with backing plates - to fasten the hood down completely. We recommend between 10-13 of these pins around the entire perimeter of the hood to ensure a good snug fit.
The bolt on hoods we make function like factory.
They will accept your factory hinges and front latch.
Thanks Much.
Jean
Jetzt muß ich nur mehr schaun wie ich das Ding herbringe
sodala jetzt bin ich wieder schlauer geworden
das ist die Antwort von denen Kapitänkurtl hatte recht
Morning Simon.
Thanks much for your purchase!
We can ship overseas, but it is a very expensive option with the carriers we have access to.
Most times, it is best if our customers make arrangements with a forwarding company here in the states that we can ship to, and they will handle the remainder of the journey from there.
Our pin on hoods are strictly for racing application.
There are no provisions for the rear hinges...
We recommend the use of dzus fasteners - small screw type pins with backing plates - to fasten the hood down completely. We recommend between 10-13 of these pins around the entire perimeter of the hood to ensure a good snug fit.
The bolt on hoods we make function like factory.
They will accept your factory hinges and front latch.
Thanks Much.
Jean
Jetzt muß ich nur mehr schaun wie ich das Ding herbringe
- hier-kommt-kurt
- Pro Stock
- Beiträge: 3578
- Registriert: Freitag 3. September 2010, 13:08
- Barvermögen: Gesperrt
- Wohnort: St.Margarethen i.B.
- simon74
- V8 Cruiser
- Beiträge: 95
- Registriert: Sonntag 27. Januar 2013, 13:01
- Barvermögen: Gesperrt
- Wohnort: Radenthein/Kärnten
- Kontaktdaten:
- Fredl
- Street Machine
- Beiträge: 739
- Registriert: Freitag 23. März 2007, 00:35
- Barvermögen: Gesperrt
- Wohnort: Bruck
frag mal bei www.usa-importservice.de nach, sollte sich zumindest der transport nach deutschland relativ gering halten. und weiter von DE hierher wirds wohl auch geringer sein als direkt von übersee
- simon74
- V8 Cruiser
- Beiträge: 95
- Registriert: Sonntag 27. Januar 2013, 13:01
- Barvermögen: Gesperrt
- Wohnort: Radenthein/Kärnten
- Kontaktdaten:
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 3 Gäste